Identify VMNICs
VMware names them as they boot up so not always in the order you might thing.
Easiest way is plug in the port and watch the VMware interface to see if it shows as up.
Also a good idea to enable CDP on the VMware and the switch on the other side.
We want to run at least 2 high bandwidth (10gig plus) cables from switch to VMwrae.
Config as trunk on switch
VCenter config
Network virtual siwtches
Go to VMhost
Configurte
Virtual switches
Add networking
Virtual machine port or for standard switch
select vswitch
Give a name DMZ
Fill in vlan number
Finish
VLAN modes
vlan - pick 250
vlan trunking - pass the trunk onto the VM (won't use it often)
Private vlan - for Pvlans (won't use often either(
No comments:
Post a Comment